Products

Fiber Optic Horizontal Splice Closure

The fiber optic horizontal splice closure is suitable for protecting fiber cable splices in straight-through and branching applications. Based on an advanced formula, the plastic parts are made of injection-molded, high-strength engineering plastic ABS or PC by numerical control equipment; therefore effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation. The strong housing and main components provide fire resistant, waterproof, and quakeproof while protecting splices during pulling, compressing, and impacting, bending, tensioning, axial tensioning.

Place of Origin: Shenzhen, China (Mainland);
Brand Name: OPTICO;
Material: ABS or PC;
Dimension (cm): 47*18*13;
Cable Entry & Exit: 3 Entry 3 Exit;
Maximum capacity: 96 cores;
Payment Terms: T/T, L/C, West Union; 30% deposit, 70% balance before shipment;
Production Time: 7~15 days after deposit;

Seal tape, Insulation tape, Nylon tie, heat shrinkable sleeve, metal hook, seal fittings,internal hexagonal spanner;
Atmospheric pressure:70~106KPa
Optic property:
The spare fiber coiled in the fiber emplacing device; the fiber connector won’t attenuate during the FOSC installation operation period.
Seal Performance:
After the closures are sealed, then pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure.
Re-encapsulation Performance:
The closures are pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure after three times of repeat encapsulation;
Voltage-resistance strength:
Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.
Insulation resistance: ≥2X104MΩ
Span-life: 30 years.